Vector GL2000 4 Channel CAN Data Logger w/Remote Trigger and Software

Description

Vector GL2000 4 Channel CAN Data Logger w/Remote Trigger and Software. Includes Logger Configurator software, Data Transmission Cable for live reading or changing of settings. Also includes a 2GB SD card for remote logging. Can be configured multiple ways to capture up to 4 CAN channels, Ethernet and Serial data. Also includes a manual trigger to begin/stop recording. All technical details can be found on the Vector website: https://www.vector.com/int/en/products/products-a-z/hardware/gl-logger/#c6586
Retail: ,100
This logger is the ideal solution for operators of test fleets to log the CAN and LIN data communication of
moderate-sized networks
. Messages are saved and evaluated according to the loaded configuration. This logger exhibit low current consumption in Sleep mode and are therefore ideal for continuous use in the vehicle. The GL2000 is immediately ready to log from Standby mode, so the system start can be acquired. In addition, its
compact package
simplifies installation of the logger in any vehicle.
Simultaneous logging of
4 CAN
channels,
2 LIN
channels and
4 analog
and
4 digital inputs
Saving of data on SD card (up to 2 GB) resp. on SDHC card (up to 32 GB)
Fast start-up time
, typical 170-180 ms - provided: 2 GB Xmore SD memory card
Recording of the system startup (wake-up cause) from standby mode
Permits continuous use in vehicle due to low current consumption in Sleep mode (<1 mA) or in Standby mode (typ. 60 mA)
Logging of the system start
(case of wake-up) from
Standby mode
Fast read-out of the logging data directly via USB or commercially available SH/SDHC card reader
Optional wireless data transmission
via wireless 4G/LTE to upload the logged data and to download a new configuration (sold separately)
Automatic conversion to BLF, ASC, MDF or TXT format
One ring buffer either for
long-term
or for
event-driven logging
Supports databases for symbolic selection of messages and signals in configuring filter and trigger conditions
Remote controlled initiation of a manual trigger
Logging of diagnostic data over CAN, import of diagnostic descriptions in CDD, ODX/PDX and MDX formats
Optional measurement data acquisition over CCP/XCP as well, including with Seed & Key
Online classing
Signal sound by a buzzer
Easy-to-use
graphical configuration tool
Currently Configured for 4 CAN Channels on two 9-pin connectors. Can easily be changed to different connectors
Shipped via USPS or FedEx Flat Rate.