Torch Melting Kit Gold Silver Crucible, Handle, Ingot Mold, Borax & Stirring Rod

Description

TORCH MELTING KIT FOR GOLD AND SILVER - SET OF 5
CRUCIBLE -  WHIP HANDLE - 3 CAVITY GRAPHITE INGOT - BORAX & STIRRING ROD
1
-
Ceramic Crucible
is made of High Grade Fused Silica, a long lasting ceramic dish
Made in Italy "A-1 TOP QUALITY"
withstands temperatures up to 2500°F / 1371°C.  This round dish crucible has a pouring spout to easily fill the ingot.
Crucibles should be glazed with Borax powder prior to use, which also helps extend the life of the crucible. *Contact us for details on use and care of crucibles or with questions or assistance that you may need.
SPECIFICATIONS:
·
Crucible has pouring spout.
·
Outside Diameter with Lip: 3-5/8" - 92.12mm
·
Height: 1-9/64" - 28mm
·
Capacity Gold : 200 dwt / 300 grams (Approximately 10Toz)
·
Weight: 3.5oz
2
-
Whip Crucible Dish Holder
is a wire handled reverse action tool, this instrument pinches and holds the dish in place when melting and pouring of the molten metal. Made of stainless steel, the spring action keeps good tension to assure the user that melting dishes will not slip.
SPECIFICATIONS:
·
Material: Stainless Steel Wire
·
Whip Handle Length:
10-1/4"
3
-
Graphite Mixing Rod
for Gold & Silver, stir your precious metals, scrap while melting; graphite is also used to remove any impurities on the surface of the molten metal.
SPECIFICATIONS:
·
5/16" Diameter  x 12" Long
4
-
Borax
Technical Grade in a 2oz. Bag, this is Borax Pentahydrate in the Granular form.  Borax can be used to glaze ceramic crucibles, as a flux when melting and casting. Borax when used in melting of Gold and Silver helps to dissolve Oxides and other impurities and produce a fluid borate slag that collects on the surface of the molten metal, This slag is periodically removed, by use of a carbon-graphite
SPECIFICATIONS:
·
Borax Technical Grade Pentahydrate Granular
·
Bag of 2oz.
5
-
Graphite Ingot Mold
for Gold & Silver Bars is made with High Density fine grain graphite is machined from a solid Graphite Extruded Bar.
The weight of the bar will depend on the metal you’re working with: Will Depend on the particular karat of Gold and the metal density and how full you fill the cavity.
The 3 capacity sizes of the Ingot is 2 - 5 -10 T.oz, in Gold… while the Capacity for Silver will be less, approximately half of the gold weight.
SPECIFICATIONS:
·
3 Cavity - Capacity 2oz - 5oz - 10oz. for GOLD
·
Machined Graphite Mold
·
Overall Outer Block:
3" x 4" x 1"
·
Small Cavity 2 Troy Oz:
0.18" Depth
x
0.85" Width
x 1.24" Length
·
Medium Cavity 5 Troy Oz:
0.240" Depth
x 0.85" Width
x
2" Length
·
Large Cavity 10 Troy Oz:  0.430" Depth x 0.85" Width x 2" Length
Note: Volume Capacity listed above is for Gold… Silver will be approx. half.
SALE is for the SET of 5 Items as listed above.
Visit
JETS INC.
our ebay store to see a wide range Melting Supplies including Stirring Rods and Handles along with many more Crucibles in all sizes and shapes, Heat Gloves and a selection of
J
EWELERS
E
QUIPMENT
T
OOLS &
S
UPPLIES
JETS Inc.
721 CKSP