-40%
Supco LCV LOGiT Current/ Voltage Data Logger, Lot of 6 with Programming Kit
$ 419.76
- Description
- Size Guide
Description
SUPCO LCV DataLoggers - 1 Lot of 6 with LLSU Programming KitDataloggers will ship with n
ew batteries.
These dataloggers have provided excellent service and due to a change in process are being released as a group to the market.
They are in good condition, individually numbered and paired (calibrated recording unit to clamp) and serialized.
NOTE: Most units have had the clamp cable coated with Plasti-Dip for additional protection of the cable wires.
Each datalogger includes recording unit, Amp clamp, connecting cable with alligator clip leads, new battery and case (one or more cases have a missing zipper pull tab and one clamp has a modestly extended cord).
++++++++++++++++++++++++++
Data Logger Features
External current probe and voltage measurements
Over/under alarms for current and voltage visual alarm indication
Simultaneous single phase current and voltage monitoring verification of power conditions, compressor and fan run cycles and use three LCV's for three phase applications
Single point offset calibration available through software
Measures 3 length by 2-1/2 width by 1-3/32 height.
The LCV data logger is a precision instrument for recording AC current and AC voltage. AC current is sampled using the supplied clamp probe.
The logger can store up to 21,500 and up to 10,750 data points, when it is setup to record either AC current or AC voltage (but not both). Each logger is factory calibrated. This means that the clamp probes are not interchangeable.
Sample point capacity: 10750 and 21500 points for current and voltage. Sample rate: 1 second to 18 hour. Alarms: over and under alarms for current and voltage visual alarm indication.
Current range: 0 to 300 Amps AC. Current accuracy: +/- 5 percent. Current resolution: 0.1 Amp AC.
Voltage range: 0 to 500 volts AC. Voltage accuracy: +/- 1 V AC. Voltage resolution: 0.1 VAC. Time accuracy: +/- 100ppm at 75 degree F.
Operating temperature range: 32 to 140 degree F (0 to 60 degree C) using alkaline battery, -40 to 150 degree F (-40 to 65 degree C) using lithium battery. Humidity: 0 to 95 percent, Non-condensing. Storage temperature: -40 degree F OE 170 degree F (-40 degree C OE 77 degree C).
Calibration: single point offset calibration available through software, current and voltage are factory calibrated. Power source: 9V alkaline or lithium battery. Battery life (average use): 20 months using alkaline battery, 40 months using lithium battery.
Measures: 3 length by 2-1/2 width by 1-3/32 height. Weight: 2.5 oz (71g).