-40%
Motul 8100 ECO-LITE 5W30 Full Synthetic Performance Engine Motor Oil 5L (Qty 1)
$ 20.46
- Description
- Size Guide
Description
Motul 8100 ECO-LITE 5W30 Full Synthetic Performance Engine Motor Oil 5L (Qty 1)Part #
108214
x1 Bottle
TYPE OF USE
100% synthetic Fuel Economy engine oil specially formulated for recent gasoline engines,turbocharged or naturally aspirated, direct or indirect injection, designed to use oil with low friction and low HTHS (High Temperature High Shear) viscosity (= 2.9 mPa.s). Suitable for modern gasoline engines requiring a viscosity grade 30 and fuel economy lubricant (APISN standard). Compatible with catalytic converters. This type of oil may be unsuitable for use in some engines. Refer to the owner manual if in doubt.
PERFORMANCES
STANDARDS : API SN/CF, ILSAC GF-5, Dexos1Gen2
RECOMMENDATIONS:
HONDA gasoline engines
SUBARU gasoline engines
TOYOTA gasoline engines
The API SN standard is fully backward compatible over API SM requirements and all former API standards.
API SN lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, anti-wear protection and enhanced performance at cold temperature during the whole oil life span.
MOTUL 8100 Eco-lite 5W-30 provides high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption, improves oil flow at start up for faster oil pressure build up, faster rev raisings and aster operating temperature reach.
Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2) emissions.
RECOMENDATIONS
Drain interval: according to manufacturers’ recommendations and tune to your own use.
MOTUL 8100 Eco-lite 5W-30 can be mixed with synthetic or mineral oils.
Before use always refer to the owner manual or handbook of the vehicle.
PROPERTIES
Viscosity grade SAE J 300 5W-30
Density at 20°C (68°F) ASTM D1298 0.849
Viscosity at 40°C (104°F) ASTM D445 62.4 mm²/s
Viscosity at 100°C (212°F) ASTM D445 10.4 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 3.1 mPa.s
Viscosity index ASTM D2270 156
Pour point ASTM D97 -33°C / -27.4°F
Flash point ASTM D92 230°C / 446°F
Sulfated ash ASTM D874 0.84% weight
TBN ASTM D2896 7.2 mg KOH/g