Melting Kit Melt Gold 150 Dwt Set Crucible Dish Cup - Tong - Carbon Rod & Borax

Description

TORCH MELTING CRUCIBLE & TONG
ROUND DISH CRUCIBLE FOR MELTING
CRUCIBLE WITH HANDLE/TONG
-
SET Includes
-
- Crucible – Handle – Borax – Graphite/Carbon Rod
SET of 4 items for Melting Gold and Silver – Capacity is 150dwt of Gold and 75dwt of Silver.
1.
Crucible - can be used for melting and pouring
Gold
,
Silver
,
Copper,
Brass
and more.
Crucible is made of high grade fused Silica
, withstands temperatures up to
2500F/1371°C
.
Crucibles should be glazed with Borax prior to use, which also helps to extend the life of the crucible.
CRUCIBLE
CRUCIBLE
Specifications:
J
ETS # for Crucible 0316-251
Made in Italy
Diameter:
3" - 78mm
( All Dimensions are Approx +/- )
Height:
1.56" - 39mm
Interior Center Depth:
13/16" - 20.5mm
Inside Crucible Diameter:
2-3/8" - 60mm
Crucible Capacity & Volume:
150dwt – 7-1/2Toz -
233.3 Gr
-
25cc (For Gold)
Crucible Pouring:
Grooved on both Sides
Crucible Weight:
9oz.
2.
Handle Holder/Tong
with Wood Handle.
This handle/tong holds crucibles 0316-251, any round diameter crucibles that is 2-7/8"- 3" outer diameter
.
HANDLE
JETS # for Handle 0311-201
Made in USA
The crucible holder shaft is steel mounted into a hardwood handle. The shaft is 1/2" wide x 1/8" thick steel, with a 1/4" screw and wing nut to assure a firm hold while transferring liquid metals.
Overall length of handle measures 15-1/2" +/-
3.
Borax
for glazing and melting a 2oz Bag. Crucibles should be
pre-heated
and
glazed
with Borax prior to use, which also helps extend the life of the crucible. Borax is also used as a flux when melting.
Borax when used in melting of Gold and Silver helps to dissolve Oxides and other impurities and produce a fluid borate slag that collects on the surface of the molten metal. This slag is periodically removed, by use of a carbon-graphite or clay rod.
JETS Borax # 0326-0202
Made in USA
4.
Carbon Graphite Rod,
5/16” Diameter with a 12” in length stir your precious metals, scrap while melting; graphite is also used to remove any impurities on the surface of the molten metal. The carbon rod is used when melting Gold & Silver metals. Rod is used for stirring the molten metal in order to get a good homogenous mix of the alloys. Carbon stirring rods are made of high density fine grain graphite
, high temperature grade.
JETS Product # 0311-112
Made in USA
Set of 4 Pieces -
JETS KIT # 0311-25054
*Protective Clothing, Heat Gloves and face & Eye protection must be worn when melting metals.  *WORK SAFE* all SAFETY FACTORS must always be the PRIORITY.
NOTE:
If you need any technical assistance or information on Melting or Glazing let us know.
SHIPPING: Via USPS MAIL
***
Domestic Via Priority Mail Fast & Free
NOTE: Visit
JETSTOOLS
ebay Store Listings, where you can see many more Precious Metal Melting Crucibles and Supplies, and a selection of
J
ewelers
E
quipment
T
ools &
S
upplies
.
JETS Inc.
PM 1.96LZ    20x4x4bs 514 CKSP  Z M