GSP-6 Temperature & Humidity Data Logger USB Temp Data Logger Recorder Vaccine

Description

GSP-6 Temperature & Humidity Data Logger USB Temp Data Logger Recorder Vaccine
Specification:
Temperature measuring range:-40℃～85℃
Temperature accuracy:±0.5℃(-20℃～40℃);±1℃(others)
Humidity range:10%～99%
Humidity accuracy;±3%RH(25C,20%~90%RH);±5%RH(others)
Resolution: temperature 0.1℃,humidity 0.1%RH
Record capacity:16000 points(MAX)
Dimension;118 (length)*61.5(width)*19(height)(mm)
Record interval:10 sec～24 hour continuously set
Data interface:USB
Power supply:single-use 3.6V lithium battery or powered via USB
Battery life:two years at room temperature with 15 minute record interval and buzzer alarm disabled
Ambient temperature:-30℃～70℃.At low temperature environment,the LCD screen displays normal record but a little slowly.It will display data normally when the ambient temperature returns to normal.
​Use the data logger for the first time
1. Install the data management software for RC-61 data logger (referred to as the data management software).Insert the data logger to a computer USB port and install the setup software according to the prompt information.
2. Open the software, and the data logger will automatically upload information after connected to the computer.
3.Click the icon "set parameter"and set the parameters according to your desire. Click "save parameter"to exit from the setting interface.
4.Press and hold the left button for more than 4 seconds,the symbol lights to start recording.Click the icon "upload data"to view the data.
5. Log out the data management software.
​