Campbell Scientific CR3000 Measurement & Control Datalogger Bundle (Best Price!)

Description

I'm including all the additional equipment I used with the CR3000.
NL 115 Ethernet Interface and CompactFlash Module
DCDC18R 12 to 18 Vdc Boost Regulator
Power Adapter PN9591
AM25T 25-Channel Solid-State Thermocouple Multiplexer SN: 6654
AM25T 25-Channel Solid-State Thermocouple Multiplexer SN: 6864
AM25T 25-Channel Solid-State Thermocouple Multiplexer SN: 6865
SDM-CAN Datalogger-to-CANbus Interface Module SN: E2507
SDM-CAN Datalogger-to-CANbus Interface Module SN: E2516
Campbell Scientific Compact Flash CFV-2GB-TSI-3522
Terminal Block DIN
New Batteries(2) NP7-6 6V, 7.0Ah Genesis
Detailed Description
Housed in a portable, self-contained package, the CR3000 Micrologger
®
consists of measurement and control electronics, communication ports, 16-character keyboard, display, power supply, and carrying handle. The integrated display shows 8 lines x 21 characters (64 x 128 pixels).
The CR3000 has a choice of three power-supply base options (alkaline, rechargeable, or no battery). Low power consumption allows the Micrologger
®
to operate for extended time periods on its battery recharged with a solar panel—eliminating the need for AC power. It suspends execution when primary power drops below 9.6 V, reducing the possibility of inaccurate measurements.
The on-board operating system includes measurement, processing, and output instructions for programming the data logger. The programming language, CRBasic, uses a BASIC-like syntax. Measurement instructions specific to bridge configurations, voltage outputs, thermocouples, and pulse/frequency signals are included. Processing instructions support algebraic, statistical, and transcendental functions for on-site processing. Output instructions process data over time and control external devices.
Specifications
-NOTE-
Note: Additional specifications are listed in the
CR3000 Specifications Sheet
.
Operating Temperature Range
Battery bases have different temperature ranges.
The rechargeable base option has an operating temperature range of -40° to +60°C. The alkaline base option has a temperature range of -25° to +50°C.
-25° to +50°C (standard)
-40° to +85°C (extended)
Non-condensing environment
Maximum Scan Rate
100 Hz
Analog Inputs
28 single-ended or 14 differential (individually configured)
Pulse Counters
4
Voltage Excitation Terminals
4 (VX1 to VX4)
Communications Ports
CS I/O
RS-232
Parallel peripheral
Switched 12 Volt
2 terminals
Digital I/O
Certain digital ports can be used to count switch closures.
3 SDM and 8 I/Os or 4 RS-232 COM
I/O ports can be paired as transmit and receive for measuring smart serial sensors.
Input Limits
±5 Vdc
Analog Voltage Accuracy
±(0.04% of reading + offset) at 0° to 40°C
ADC
16-bit
Power Requirements
10 to 16 Vdc
Real-Time Clock Accuracy
±3 min. per year (Correction via GPS optional.)
Internet Protocols
FTP, HTTP, XML POP3, SMTP, Telnet, NTCIP, NTP,
Communication Protocols
PakBus, Modbus, DNP3, SDI-12, SDM
Idle Current Drain, Average
2 mA (@ 12 Vdc)
Active Current Drain, Average
3 mA (1 Hz sample rate @ 12 Vdc without RS-232 communication)
10 mA (100 Hz sample rate @ 12 Vdc without RS-232 communication)
38 mA (100 Hz sample rate @ 12 Vdc with RS-232 communication)
Dimensions
24.1 x 17.8 x 7.6 cm (9.5 x 7.0 x 3.0 in.) with low-profile base
24.1 x 17.8 x 11.9 cm (9.5 x 7.0 x 4.7 in.) with rechargeable battery base
24.1 x 17.8 x 11.9 cm (9.5 x 7.0 x 4.7 in.) with alkaline battery base
Weight
1.6 kg (3.6 lb) with low-profile base
3.8 kg (8.3 lb) with alkaline battery base
4.8 kg (10.7 lb) with rechargeable battery base
Compatibility
Note:
The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Software
Product
Compatible
Note
LoggerNet
Version 3.2 or higher
RTDAQ
Version 1.0 or higher
Short Cut
VISUALWEATHER
Version 2.0 or higher
Additional Compatibility Information
Sensors
With several channel types, the CR3000 is compatible with nearly every available sensor, including thermocouples, SDI-12 sensors, and 4 to 20 mA sensors. A custom ASIC chip expands its pulse count, control port, and serial communications capabilities. The CR3000's I/O ports can be paired as transmit and receive, allowing serial communications with serial sensors and devices.
Measurement & Control Peripherals
The CR3000 is compatible with all of our CDMs (requires an SC-CPI), SDMs, multiplexers, vibrating-wire interfaces, terminal input modules, and relays.
Communications
The CR3000 communicates with a PC via direct connect, Ethernet interfaces, multidrop modems, short-haul modems, phone modems (land line, digital cellular, and voice-synthesized), RF telemetry, and satellite transmitters (Argos, Iridium, and Inmarsat).
Data can be viewed on its onboard keyboard display, user-supplied iOS or Android device (requires LoggerLink), CD295 DataView II Display, or a user-supplied PDA (PConnect or PConnectCE software required).
Compatible external data storage devices are the CFM100, NL115, and SC115.
Enclosures
The CR3000 can be housed in an ENC12/14, ENC14/16, ENC16/18, ENC24/30, or ENC24/30S enclosure.
Power Supplies
The CR3000 is typically powered by its on-board alkaline or rechargeable power supply (see Ordering Info). When the rechargeable power supply is used, its internal 7 A h sealed rechargeable battery needs be charged via a vehicle (requires the DCDC18R), solar panel, or ac wall charger.
The CR3000 can also come with a low-profile base that requires a user-supplied dc source. It is preferred when the system’s power consumption needs a larger capacity battery or when it’s advantageous for the Micrologger
®
to be thinner and lighter.
Software
CRBasic, the CR3000's full programming language,  supports simple or complex programming and many on-board data reduction processes.