-40%
4" Gasket Silicone Rubber & Graphite Set for Vacuum Casting Flasks Lost Wax Cast
$ 9.96
- Description
- Size Guide
Description
SET OF GASKETS 4" for PERFORATED FLASKFOR VACUUM CASTING
SILICONE
& GRAPHITE -
GASKETS FOR
4"
PERFORATED FLASKS
-
VACUUM SEAL FOR FLASK & ADAPTER RING
-
A set of 4" gaskets... High Grade Silicone and Graphite High Temperature gaskets. Gaskets are used together to provide the best seal during vacuum casting to seal perforated flask ring and casting chamber.
The Silicon acts as a sealing layer while the graphite placed on top of the silicone, protecting and prolonging the silicone seal from the high flask temperature.
The combination of the 2 types of gaskets provide a very good seal, allowing the vacuum to fully pull the molten metal into the flask.
These gaskets are die cut, have a thickness of 1/8" for the Silicone and 1/16" for the Graphite. Gaskets come in various diameters to work with individual flask OD sizes, visit our store.
SPECIFICATIONS:
JETS Product # 0304-240+15240
-
Material:
High Temperature Graphite & High Grade Silicone
-
Flask Diameter:
4" - 101.6mm
-
Gasket Outside Diameter:
5-5/8" - 143mm
-
Gasket Inside Diameter:
4-5/16" - 110mm
-
Gasket Face Width:
21/32" - 16.75mm
-
Thickness:
Graphite 1/16" - 1/8" Silicone
Item is new, Packaged - sandwiched in between cardboard to ensure safe shipping.
VERY Fragile
SHOULD NOT BE BENT
Note:
The Graphite gasket will last long and can be used as long as they are handled properly… avoiding cracking or breakage, they are subject to breakage.
SHIPPING: Via USPS MAIL
Visit
JETSTOOLS
our ebay Store to see listings for many other Lost Wax Casting Supplies and Accessories, including Casting Investment Powder, Casting and Carving Wax along with a selection of many other
J
ewelers
E
quipment
T
ools and
S
upplies
JETSINC
.
E3 1020 CKSP